Powder equipment

Pipe chain conveyor system

  Introduction

  The chain conveyor is a continuous conveying device that conveys powdery, small granular and small pieces of bulk material and can be transported in a horizontal, inclined and vertical combination.

  In the closed pipe, with the chain as the drive component to drive the material along the pipeline movement. When the horizontal transport, the material particles by the chain in the direction of the thrust of the movement. When the internal friction between the material is greater than the external friction between the material and the wall, the material moves forward with the chain to form a stable flow; when the vertical transport, the tube material particles by the chain up the thrust, because the lower The material to prevent the upper material down, resulting in the lateral side of the pressure, so the material to enhance the internal friction, when the material between the internal friction is greater than the material and the outer wall of the wall friction and material weight, the material with the chain up, Forming a continuous stream.

  Application areas

  Fine chemicals: pigments, dyes, coatings, carbon black, titanium dioxide, iron oxide, ceramic powder, tungsten, light calcium, bentonite, molecular sieve, kaolin, silica gel, activated carbon

  Pesticide Ore: Urea, Ammonium Chloride, Ammonium Bicarbonate, Soda Powder, Solid Pesticide, Tungsten Powder, Pesticide Additive, Copper Concentrate Powder, Pulverized Coal, Phosphate Powder, Alumina Powder

  Building materials: cement, clay, sand, quartz sand, clay powder, silica, limestone powder, dolomite powder, wood flour, glass fiber, silica, talc

  Food industry: flour, starch, cereals, milk powder, food additives.

  Features

  1 volumetric conveying device, can achieve the material delivery and measurement. Easy to achieve centralized control, improve the degree of automation to meet the modern enterprise requirements for environmental protection

  2 compact structure, small footprint, you can change the direction of three-dimensional transport.

  3 The material being conveyed is in a closed state from the inlet to the outlet flange. Do not have to set the dust collector. The material can be filled with gas. Transport to ensure that no dust leaks into the environment.

  4 material along the pipe smooth delivery, basically no internal movement, so the material damage less, slow corners of the delivery of very little material particles produce debris.

  5 According to the different feeding situation, the import can be separated by more than 10 meters away.

  6 sprockets have optimized shoulder, designed to optimize the use of hardened chains with minimal wear.

  7 special conveyor plate, with a very low coefficient of friction and stable transport capacity.